Company News

The correct method for installing electromagnetic flow meters

Before the electromagnetic flowmeter is officially put into operation after installation and wiring, it should be strictly checked whether the installation and wiring are correct.

2026

How to set the range of electromagnetic flowmeter and precautions for use

Like other flow meters, although the measurement range ratio of electromagnetic flow meters is 30:1, which is higher than vortex flow meters and differential pressure flow meters, it is also limited. Many customers often compare it with water meters when ordering a meter, thinking that it can measure very low flow rates;

2026

Precautions for installation of split type electromagnetic flowmeter

The controller of the split type electromagnetic flowmeter should be installed vertically, and the two-phase flow should move from top to bottom to consider the mixing of solid and liquid phases. The reason is that liquid substances (such as fine sand, crushed stone particles, etc.) in the material are prone to settling. There are many fish in the other pipeline, and if the wild grass shakes in the pipeline, the output of the flowmeter will oscillate back and forth. The oscillation of the wild grass hanging around the elevator will also make the output of the flowmeter unstable. Install alloy filters at the upstream and downstream outlets of the flowmeter to cut off fish and weeds and allow them to enter the measuring tube.

2026

What are the common power supply methods for electromagnetic flow meters

Electromagnetic flow meters have become one of the priority flow meters for measuring liquid media in industrial enterprises. Due to the fact that only liquids have a certain conductivity, they can be selected as measuring tools and are more commonly used in conductive liquids such as water, sewage, sulfuric acid, and ammonia water. What are the power supply methods for electromagnetic flow meters? Currently, the main ones are 220V, 24V, and battery power supply.

2026

Instructions for wiring terminals of integrated electromagnetic flowmeter

L1/L2 (or L/N): Connect to an AC power source, with the live wire connected to L1 (or L) and the neutral wire connected to L2 (or N). Supports voltage of 220V or 24V AC. Some models require a 1A specification fuse to be connected through the FUSE terminal.

2026

< 1 >

sales@aixiyivalve.com

8615830824918

We provide full professional OEM & ODM services supported by our independent R&D design team. We launch new valve models regularly to keep your product range updated and highly competitive in the market.

Address:

Fuzhentupu Village, Fucheng Town, Baotou City, Cangzhou City, Hebei Province

Phone/WhatsApp

+86-15830824918

Send E-mail

sales@aixiyivalve.com

Quick Links

Leave Message

For more information, please leave your message below.

SEO Privacy Policy

Business License